Detail Program

Oral session A (Conference room 1)
Monday, November 6, 2017
Time Session Authors Title
16:10 ~ 16:40 Processing-Structure-Property correlations
Chairman:
Dr. S. Takahashi,
Prof. K.H. Baik
(CNU, Korea)
K.A. Khor,
L.G. Yu
Detecting Hot and Emerging Topics in Global Thermal Spray Research
16:40 ~ 17:10 Kee-Ahn Lee,
Young-Kyun Kim, Soon-Hong Park,
Ji-Hoon Yu
Effect of Heat Treatment on the Microstructure and High Temperature Mechanical Properties of Ti-6Al-4V Manufactured by Selective Laser Melting Process
17:10 ~ 17:40 Xiaoyan He,
Kun Ren,
Jing Huang,
Hua Li
Hollow nano-structured titania spheres as starting feedstock facilitate photocatalytic performances of their plasma sprayed coatings
17:40 ~ 18:00 Pei-Hu Gao,
Rong Xu,
Bai-Yang Chen,
Jian-Ping Li,
Zhong Yang,
Yong-Chun Guo,
Guo-Xi Jing
Precipitation of Graphite from Supersaturated Solid Solution F Ferroalloy Through Annealing

 

Oral session A (Conference room 1)
Tuesday, November 7, 2017
Time Session Authors Title
11:00 ~ 11:30 Thermal Barrier Coatings
Chairman:
Prof. K.A. Khor,
Dr. S.H. Park
(RIST, Korea)
Kee Sung Lee Indentation and wear evaluations of multilayered thermal barrier coatings subjected to thermal fatigue
11:30 ~ 12:00 S. Takahashi,
T. Shinoda, H. Waki, M. Kato, S. Ogawa
Measurement of Young’s Modulus at Elevated Temperature of Thermal Barrier Coatings by Flexural Resonance Method
12:00 ~ 12:20 Kwangyong Park, Yeongil Jungr, Byungil Yang,
Insoo Kim
Effects of Impurity and Phase Contents in Sprayed Yttria Stabilized Zirconia on Thermal Barrier Coatings (TBCs) Lifetime
12:20 ~ 13:10 Lunch break
13:10 ~ 13:40 Cold Spray/
Kinetic Spray
Chairman:
Prof. Chang-Jiu Li
Dr. S.H. Yoon
(RIST, Korea)

Yuta Watanabe, Motohiro Yamada, Masahiro Fukumoto Residual Stress Measurement of Cold Sprayed Cu Coating During and After Spraying
13:40 ~ 14:10 Motohiro Yamada, Keisuke Takahashi, Toibah Abd Rahim, Masahiro Fukumoto Evaluation of Cold-Sprayed TiO2 Particles by Cavitation Test
14:10 ~ 14:30 Seungtae Lee, Jaeick Kim, Changhee Lee The Fabrication and Ballistic test of Double-Layered Shaped Charge Liner via Kinetic Spray
14:30 ~ 14:50 K.H. Ko, B. Ahn,
S.-H. Jung, J. S. Park, H. Lee
Solid state amorphization transformations induced by cold spray process
14:50 ~ 15:10 Coffee break
15:10 ~ 15:30 Cold Spray/
Kinetic Spray
Chairman:
Dr. Frank Gaertner,
Dr. H.J. Kim
(RIST, Korea)
Hansol Kwon, Changhee Lee Al2O3 and Y2O3 Coating on Transparent Glass Substrate using Vacuum Kinetic Spray for Plasma Erosion Resistance
15:30 ~ 15:50 Yaoyao Fu, Yi Liu, Hua Li Vacuum cold spray fabrication of onion-like carbon coatings for enhanced adsorption of dyes in water treatment
15:50 ~ 16:10 Jaeick Kim, Jaewon Lee, SeungTae Lee, Changhee Lee Characteristics related to the deposition behavior of kinetic sprayed WC-Co
16:10 ~ 16:30 Siyuan Gao, Kazuhiro Ogawa Development of Laser Pre-Treatment Technique for Improvement of Deposition Efficiency of Cold Spray Coatings
16:30 ~ 17:10 Coffee break & Poster session
17:10 ~ 18:00 Young Scientist Forum
18:30 ~ Banquet & Awarding of prizes

 

Oral session A (Conference room 1)
Wednesday, November 8, 2017
Time Session Authors Title
09:00 ~ 09:20 Solution and Suspension based Spray Processes
Chairman:
Prof. X.K. Suo,
Dr. H. Lee
(Ajou Univ., Korea)
Chunming Deng,
Min Liu,
Xuezhang Liu,
Xiaofeng Zhang,
Ke Zou,
Ruimin Zhao,
Zijing Liu
Effect of REO on the ablation resistance performance of ZrB2-based coating for C/C composites substrate
09:20 ~ 09:40 Wan Syahmi,
M. Yamada,
M. Fukumoto
Improvement of Coating Mechanical Properties of Suspension Plasma Spray Process
09:40 ~ 10:00 Yeonwoo Yoo Characterization of Microstructure of YSZ Coatings Obtained by Suspension Vacuum Plasma Spraying
10:00 ~ 10:20 Coffee break
10:20 ~ 10:40 Mechanical Properties of Coatings / Novel Functional Applications
Chairman:
Dr. Tatsuya Tokunaga
Dr. S.H. Lee
(KIMS, Korea)

Sang-Hoon Yoon, Hyung-Jun Kim,
Seo-Jeong Park, Gyuyeol Bae
Coating Technology to Improve the Performance of Resistance Welding Electrodes
10:40 ~ 11:00 Rohit Upadhyaya, Manjunath S.Y,
Satish Tailor,
Ankur Modi
Study of fracture toughness and bend test morphologies of newly design HVOF sprayed Cr3C2-25%NiCr coating after heat treatment in narrow area
11:00 ~ 11:20 Xiuyong Chen Anticorrosion and biofouling behaviors of Fe-based amorphous coatings prepared by HVOF thermal spraying
11:20 ~ 11:40 Yi Liu,
Xinkun Suo,
Hua Li
Liquid flame spray construction of polyimide-copper antifouling coatings with micro-capsule structure for sustainable release of copper in marine applications
11:40 ~ 12:00 SunHong Park The Properties of Ni base Alloy Laser Cladding on Copper plate

 

Oral session B (Conference room 2)
Tuesday, November 7, 2017
Time Session Authors Title
13:10 ~ 13:40 Wear & Corrosion Protection
Chairman:
Prof. Kazuhiro Ogawa
Prof. K.S. Lee
(Kookmin Univ., Korea)
Hyung-Jun Kim,
Sang-Hoon Yoon,
Jin-Hong Kim,
Chang-Hee Lee,
Kyung-Ho Back,
Kee-Ahn Lee
Status and Performance of Cermet Coatings for the Replacement of Hard Cr Plating
13:40 ~ 14:10 Y.T. Xu,
X.K. Suo,
H. Li
Investigation on tribological and corrosion performances of flame sprayed aluminum/graphene composite coatings
14:10 ~ 14:30 Sharad Srivastava,
Rohit Upadhyaya
Corrosion and Wear performance of WC-10Co-4Cr coatings deposited by HVOF spraying processes on Geothermal Turbine Blades
14:30 ~ 14:50 Hyun-Ki Kang,
Yong-Kyoon Mok, Sung-Yong Lee,
Hyun-Gil Kim
Protective Coating for High Temperature Oxidation of Accident Tolerant Fuel Cladding
14:50 ~ 15:10 Coffee break
15:10 ~ 15:40 Processing-Structure-Property correlations
Chairman:
Prof. Hua Li,
Prof. K.A. Lee
(Inha Univ., Korea)
T. Tokunaga,
K. Yoshida,
H. Era
Effect of cooling rate after fusing on microstructural evolution and hardness of Co-based self fluxing alloy
15:40 ~ 16:00 Gi-Su Ham,
Sang-Hoon Kim,
Kee-Ahn Lee
High Temperature Oxidation Property of SiC Coating Layer Fabricated by Aerosol Deposition Process
16:00 ~ 16:20 Young-Kyun Kim,
Kee-Ahn Lee,
Min-Seok Baek,
Hyung-Jun Kim
Effect of Strain and Strain Rate on the Microstructure Evolution and Compressive Deformation Behavior of High Strength Copper Materials Manufactured by Cold Spray Process

 

Poster session (Poster room)
Monday, November 6, 2017 ~ Tuesday, November 7, 2017
Session Authors Title
Wear & Corrosion Protection Quy Le Thu, Tuan Nguyen Van, Ly Pham Thi,
Ha Pham Thi,
Thanh Dinh Thi Mai
Heat Treatment of an Arc Spray Nickel Chromiumalloy Coating after Sealing with Aluminum Phosphate
SUN Hua,
WANG Xuesheng,
CAI Fei, ZHANG Shihong
Effect of Y2O3 doped on wear-resistance and anti-corrosion properties of NiCr-Cr3C2 coatings
Chen Peng-fei, Wang Xue-sheng, Chen Xiang-jun, Cai Fei, Zhang Shi-hong Effect of interlayer and annealing on wear and corrosion performance of HVAF sprayed Cr3C2-NiCr coatings
L.J. Fang, J. Huang,
L. Gao, H. Li
Carbon fiber/Al composite coating deposited by arc spraying for marine applications: Carbon fiber enhanced anti-wear performances
Advances in Thermal Spray Processes Mohammed Shahien, Motohiro Yamada, Masahiro Fukumoto Particles Behavior during Reactive Plasma Spraying
Mohammed Shahien, Motohiro Yamada, Masahiro Fukumoto Reactive Plasma Synthesis and Characterization of AlN Coatings in Atomospheric Ambient
M.S. Kim, H.S. Moon, H.C. Lee, J.W. kim Characteristics of thermal spray coating layer according to nozzle size
Jin-Wook Kim,
Hyo-Seop Noh,
Sun-Ju Song,
Heung-Soo Moon
Preparation and Characterization of Thermal Spray coated Gadolinium-Doped Ceria as a Potential Substrate for NOx Sensor
Sagr Hadi A,
Yasutaka Ando
Deposition of titanium oxide film by atmospheric suspension plasma spray using Ar added N2 as a working gas
Advanced Material Systems
Advanced Characterization of Coatings
H. C. Lee, H. S. Moon,
S. M. Park, S. M. Chun
Characteristics of APS coating layer depended on improved methods of powder flow-abilities and particle size for YSZ
S. M. Park, S. M. Chun, H. S. Moon Surface modify for improving flow-ability of ceramic thermal spray powders
C. M. Chun, H. C. Lee, H. S. Moon Characteristics of coating properties by powder size
Yang Kun, Liu Min,
Mao Jie, Deng Chunming, Deng Changguang,
Liu Zijing
Comparative Study of the Microstructures and Characteristics of Conicraly Coatings Deposited by APS and LPPS methods
I. Kambayashi, Z. Zeng, N. Sakoda, T. Tokunaga,
H. Era
Evaluation of Residual Stress in Thermal Sprayed Ni-based Self-Fluxing Alloy and Alumina Coatings
Cold Spray/Kinetic Spray Botao Zhang, Xiuyong Chen, Yongfeng Gong,
Hua Li
An antibacterial hydroxyapatite/antibiotic composite coating by vacuum cold spraying

 

Session Authors Title
Thermal Barrier Coatings Boram kang,
Hoseok Kim,
Seyoun Moon
Hafnium Cabide Coating on C/C Composite with Vaccum Plasma Spray Coating System to Improve Thermal/Ablation Resistance
Ji Yoo Kim,
Heung Soo Moon,
Kee Sung Lee
Characteristics of T/EBC coatings on SiC fiber-reinforced ceramic composite for gas turbine
Chunming Deng, Min Liu, Xuezhang Liu, Xiaofeng Zhang, Ke Zou, Ruimin Zhao, Zijing Liu Effect of REO on the ablation resistance performance of ZrB2-based coating for C/C composites substrate
Sangwon Myoung, Byungil Yang. Insoo Kim, Kwangyong Park, Kyungic Jang,
Chanyoung. Park
Effect of Thermal Durability and Stability in Thermal Barrier Coatings with Microstructure Design
Soo Hyeok Jeon, Seoung Soo Lee, Yeon-Gil Jung, Sang-Won Myoung, Byung-Il Yang, Zhe Lu,
In-Soo Kim
Effects of Microstructure Design and Feedstock Species in Bond Coat on Thermal Stability of Thermal Barrier Coatings
Soo Hyeok Jeon, Seoung Soo Lee, Sung Hoon Jung, Hyeon Myeong Park, Yeon-Gil Jung Effects of encapsulation in healing agent on crack resistance behavior of thermal barrier coatings
Ho Seok Kim,
Bo Ram Kang,
Se Youn Moon
Fabrication and properties of zirconium carbide coating layer using a vacuum plasma spray system
Sung Hoon Jung, Soo Hyeok Jeon, Sang-Won Myoung, In-Soo Kim, Byung-Il Yang,
Yeon-Gil Jung
Growth Behavior of Thermally Grown Oxide Layer with Bond Coat Species in Thermal Barrier Coatings
Novel Functional Applications
Processing-Structure-Property correlations
Hybrid Spray Processes
Solution and Suspension based Spray Processes
Gu Liu, Liuying Wang,  Chaoqun Ge Micro –plasma sprayed  CNTs based composite coating for radar absorbing application
Pei-Hu Gao, Jian-Ping Li, Zhong Yang, Yong-Chun Guo, Yan-Li Wang, Yan-Rong Wang, Guo-Xi Jing Remelting and Solidification of Compacted Graphite Cast Iron Through Tungsten Argon Arc
Wei-Wei Zhang,
Guan-Jun Yang
Towards a low thermal conductivity bimodal microstructure coating deposited by hybrid spray homogeneous nanomaterials
Yasutaka Ando, Alabi Kelvin Oluwafunmilade, Hsian Sagr Hadi A,
Yoshimasa NODA
High Rate Film Deposition of Photo-Catalytic Titanium Oxide by Sub-Atmospheric Solution Precursor Plasma Spray